Instruments

Domkrats hidrauliskis (130-345MM)

Hydraulic jack (130-345MM)
-2 tons

Stock: > 1 pcs.

Domkrats hidrauliskis (140-300MM)

Used for lifting vehicles.
Equipped with working and carrying handles.
Equipped with safety relief valve.

Stock: 0 pcs.

Domkrats hidrauliskis (145-400MM)

It is used for lifting vehicles in the conditions of tire assembly workshops and technical service stations.
Complete with working handle.
Equipped with a safety valve.
The hydraulic fluid and sealing elements of the hydraulic system are intended for use at temperatures up to -20°С.
Supplied in a separate cardboard box.
Supplied in an individual plastic box.
Max load (kg) 2000
Nominal load (kg) 1500
Receiver height (mm) 145
Lifting height (mm) 400
Packaging (pcs.) 1
Weight: 10 kg

Stock: 0 pcs.

Domkrats hidraulisks

Low profile Hydraulic Jack 2.5t.
- Load capacity: 2500 kg.
- Minimum height: 8 cm.
- Lifting range: 8-36 cm.
- Indispensable in car services, tire shops and auto repair shops. - low profile allows you to slide the hydraulic compensator under any car, even with a low suspension.
- Made from hardened steel.
- There is a carrying handle.
- Load stabilizing rubber, rubber height - 1.5 cm, rubber diameter - 5.2 cm.
- Equipped with wheels that allow you to move it anywhere under the car.
- Equipped with a release valve for safety.
- Included optional extension to increase maximum height.
- The elevator is CE and TÜV Rheinland GS certified.
- Weight: 11 kg

Stock: > 1 pcs.

Domkrats hidraulisks

Hydraulic Jack, 2 tons.
- Load capacity: 2000 kg.
- Lifting height: 135-330 mm.
- Foldable lifting handle with rubber tip for easy grip, total length 69.5 cm.
- Robust design, made of hardened steel.
- Equipped with a drain valve integrated with a safety valve.
- Metal front wheels and swivel ball bearing rear wheels for stable operation and mobility.
- Dimensions: 44 x 19 x 13.5 cm.
- CE and TÜV Rheinland GS certificate.
- Weight 8.5 kg.

Stock: > 1 pcs.

Domkrats zobstieņa 33 (130-645MM)

Max load (kg) 3000
Pick up high (mm) 130
Lift high (mm) 1050
High (mm) 1240

Stock: 0 pcs.

Elastīgs satvērējs ar magnētu

DESCRIPTION:
The gripper is used to collect small items in hard-to-reach places.
- there is a magnet at the end of the grip.
PRODUCT SPECIFICATION
Length: 600mm
Receiver opening: 20mm
Load capacity: 1.13 kg

Stock: 0 pcs.

Electric extension cord reel

A high-quality, durable drum extension cord with a cable length of 30 meters, equipped with four sockets. It consists of three copper wires, each with a cross-section of 1.5mm2, allowing four devices to be connected simultaneously. This solution is particularly useful on construction sites, in workshops, or in production facilities.
A convenient handle and crank make it easy to wind the cable and transport the extension cord.

Technical specifications:
- Weight: 5kg
- Cable color: black
- Number of sockets: 4
- Extension cord type: drum
- Cable length: 30m
- Cable cross-section: 1.5mm2

Stock: > 1 pcs.

Electric extension cord reel

The electric extension cord reel is perfect for any home, garden, workshop or construction site. Equipped with a thermal fuse that protects against overheating.

Product characteristics:
- drum made of steel
- steel frame
- has a cable holder and brake
- 4 sockets
- sockets equipped with flaps

Technical specifications:
- Length: 50m
- Cable cross-section: 3x2.5mm2
- Cable type: H05VV-F
- Number of Sockets: 4*230V
- Thermal fuse: YES

Stock: > 1 pcs.

Elektriskā triecienuzgriežņu atslēga

Electric Impact Wrench 1/2' 450W with 4pcs Chrome-Vanadium sockets 17, 19, 21 & 22 mm.
Product Features:
- High 720 Nm torque, forward & reverse drive
- No load speed up to 3600 rpm
- Quick replacement of carbon brushes
- Bit holder size 1/2' square drive
- Includes Chrome-Vanadium sockets sizes: 17, 19, 21, 22 mm

Technical Data:
- Input Voltage: 230V~50Hz
- Power: 450W
- No Load Speed: 3600 rpm
- Maximum Torque : 720 Nm
- Drive Size : 1/2'
- Sockets Included: 17, 19, 21, 22 mm
- Certificates: CE

Stock: > 1 pcs.

Electric extension cord

Stock: > 1 pcs.

Electric heater

Stock: > 1 pcs.

Elektroniskais motorstundu skaitītājs

Electronic hour meter.
Works with all 2T and 4T spark ignition engines. It is ideal not only for passenger cars, but also for all vehicles and machinery powered by a gasoline engine, such as motorcycles, attachments and lawn mowers.
Product Features:
- Compact petrol engine hour meter allows precise monitoring of engine wear.
- Thanks to the use of a counter, you always know when to change spark plugs, oil or adjust valves.
- Easy installation: just wrap a few turns of one meter wire around the spark plug.
- During operation, an hourglass will appear on the screen, indicating that the counter is working correctly.
- Counts up to 9999.9 hours with 0.1 hour resolution.
- Turns on automatically when the engine is started.
- It does not require batteries to operate!
- Waterproof, shockproof, resistant to high temperatures - up to 85 degrees Celsius.
Everything needed for assembly is included in the kit.
Specification:
- Material: plastic.
- Power supply: external (after starting the engine).
- Measuring range: 9999.9 h.
- Measurement accuracy: 0.1h.
- Dimensions: 4.1 cm x 4.6 cm x 7.3 cm.
- Power cord length: 190 cm.
- Black color.

Stock: > 1 pcs.

Eļļas filtra noņemšanas atslēga

Stock: 0 pcs.

Eļļas filtra uzgriežņu atslēga

Oil filter wrench jaw type
Used for dismantling oil filters of internal combustion engines.
Wrench has a gear self-clamping design with three angled prongs.
Knurling on the prongs allows reliably fix the filter.
Wrench material – chrome-vanadium tool steel.
Has a standard 3/8 ' square drive for tap wrench.
Equipped with an universal adapter with internal square drive 1/2' for the tap wrench and external hex socket 21 mm for the wrench.
Delivered in individual cardboard box.
Size (mm) 35-75

Stock: 0 pcs.

Eļļas filtra uzgriežņu atslēga

Oil filter wrench jaw type
Used for dismantling oil filters of internal combustion engines.
Wrench has a gear self-clamping design with three angled prongs.
Knurling on the prongs allows reliably fix the filter.
Wrench material – chrome-vanadium tool steel.
Has a standard 3/8 ' square drive for tap wrench.
Equipped with an universal adapter with internal square drive 1/2' for the tap wrench and external hex socket 21 mm for the wrench.
Delivered in individual cardboard box.
Size (mm) 65-110

Stock: 0 pcs.

Eļļas filtra uzgriežņu atslēga

Universal chain wrench for oil filter OILW-C.
- Metal anti-slip chain.
- Chain length ~ 38 cm.
- Durable metal handle.
Other uses: works well at home as a can opener.

Stock: > 1 pcs.

Oil filter wrench jaw type

Stock: > 1 pcs.

Oil changing pan

Stock: > 1 pcs.

Eļļotājs

OIL CAN 300ML METAL (FLEXIBLE END)
Used for oiling friction units with liquid lubricants which do not require supply under pressure.
Equipped with spout.

Stock: 0 pcs.