Components

El.vadi

Two-Lamp wiring kit for Lazer Lamps High Performance LED lights. The setup is quick, easy, and reliable with 2-pin Deutsch connection and no configuration procedures. The kit features a 12V relay (in waterproof housing), fuse, a battery terminal at one end, and 6.5m of flex on the lamp cable, and allows for the operation of Lazer products either in parallel with the standard lighting on the vehicle, and/or via an independent switch which can be mounted inside your vehicle.

All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Compatible with:
Linear-24 Flood
Utility-25
Utility-25 MAXX
Utility-45
Utility-50
Utility-80 HD (Heavy Duty)
RP Spot

Specifications:
6.5m cable lengths
Includes 12V relay and 20 amp fuse
Relay holder approved to IP53 when mounted in a vertical (upright) orientation
2-pin deutsch connections
Includes on/off switch for independent operation
Braided cable sections for added protection in engine bay

Stock: 0 pcs.

Klemmes akumulatoram

Universal battery terminals.
Conduct electricity very well.
They provide a strong clamp, adjustable with screws.
Includes 2 pcs. - for positive (+) and negative (-) poles.

Stock: > 1 pcs.

Klemmes akumulatoram

Car Battery Terminals up to 12V
Made of brass, which means the terminals conduct electricity well and are not subject to corrosion.
The set includes 2 pcs. - for positive (+) and negative (-) poles.
The size is adjustable with screws.
These terminals are standard on most cars.
Before installing or replacing the terminals, thoroughly clean the battery connector to ensure good contact and proper charging without losses.

Stock: > 1 pcs.

Termosarukuma cauruļu komplekts

Heat shrink tube set, 128 pcs.
The high-quality tube set consists of 128 heat shrink tubes of 6 popular sizes:
- 2.5 x 80 mm: 40 pcs.,
- 3.5 x 80 mm: 32 pcs.,
- 5.0 x 80 mm: 24 pcs.,
- 7.0 x 80 mm: 16 pcs.,
- 10.0 x 80 mm: 8 pcs.,
- 13.00 x 80 mm: 8 pcs.
Heat shrink tubes protect cables from moisture and corrosion.
Packed in a plastic container with practical compartments.

Stock: > 1 pcs.

El.vadi

A set of electrical wires for connecting 2 Lazer LED spotlights with built-in position lights, code LAZER 2L-LP-PL-120.
Included:
- Relay 12 V (in a waterproof case).
- Fuse 30 A,
- Flexible cable 1.2 m long.
It has a battery terminal on one end and an optional headlight on/off switch that needs to be installed inside the car.
The relay holder meets the IP53 standard when installed in a vertical position.
The product is specially designed for Lazer LED lights.
Compatible with:
Triple R 750 (Generation 2)
Triple R 850 (Generation 2)
Triple R 1000 (Generation 2)
Triple R 1250 (Generation 2)
Linear-12 Elite (with position light)
Linear-18 Elite (with position light)
Sentinel (standard with position light).

Stock: > 1 pcs.

El.vadi

Wire kit WK064 for connecting two additional lights.
- 4-pin DT Deutsch,
- 4 mm² cables,
- 4-pin 12V 40A relay,
- Fuse 30A.

Stock: 0 pcs.

El.vadi

Wiring kit for connecting one lamp.
Weight: 226g (net 226g)
Voltage: 12V
Plug type: 4-pin DTP
Information: 4-pin DTP Deutsch wiring kit, 2.5mm² cables, 4-pin 12V 40A relay, Fuse 25A
Warranty (months): 12

Stock: > 1 pcs.

Slēdzis

Description of the product
Universal black round switch 12V 20A

Parameters:
12VDC 20A
Function: ON-OFF
Black colour
Number of connection connectors: 2 pcs.
Operating temperature range: -30ºC - +80ºC
Durability: 10,000 cycles
Mounting hole: fi20mm
High quality workmanship, guarantee of long-term reliability.

Stock: > 1 pcs.

Slēdzis

Description of the product
Oval rocker switch ON-OFF-ON The rocker switch - 6A/230V - has terminals for soldering wires or inserting a car connector.

Moreover, it is characterized by small dimensions and will look nice in the place of installation. For installation, it requires a hole with a diameter of 20 mm.

Product specification:

Contact load: 6A 230V
Switching method: stable
Number of pins: 3
Operating temperature: -30°C ~ +80°C
Service life: 10000 cycles

Stock: > 1 pcs.

Slēdzis

The switch with the control indicator of 12 volts.
-green

Stock: > 1 pcs.

DT savienotāja spraudnis

Code 1605-N8K093
DT connector plug (2-3mm2).
- 4-cont.

Stock: > 1 pcs.

DT savienotāja rozete

Code 1605-N8K093
DT connector socket (2-3 mm2).
- 4-cont.

Stock: > 1 pcs.

El.vadi

Electrical wires 1L - LP-220.
- Rated voltage: 12V
- Number of lights: 1
- 2-pin Superseal connector.
Package Included:
- 12V relay (in a waterproof case),
- fuse 20A,
- terminal for connecting the battery at one end,
- cable 3 m long for connecting the headlight,
- a light on/off switch that can be installed inside the car.
The product is specially designed for Lazer LED headlights.
Compatible with:
ST Evolution (all products)
Triple-R 750 Elite (2nd generation)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (2nd generation)
Linear-6 (Standard/Elite)
Linear-12 (Standard/Elite)
Linear-18 (Standard/Elite)
Linear-36
Linear-42
Linear-48
Sentinel 7 inches,
Sentinel 9 inches Elite

Stock: > 1 pcs.

Slēdzis

Switch KE/RO/3F.
- ON-OFF-ON, fixed.
- 3-pin.
- 10 A/250 V AC.
- Ø19.8 mm,
- SP3T.
- Round, black in color.

Stock: > 1 pcs.

El.vadi

1605-WK045 - set of wires for connecting two additional lights.
- Voltage: 12/24 V
- Max.12V 2x150W, 24V 2x300W.
- 4-pin DT-4 connector.
- CAN compatible.
- Protected from corrosion.
- Fully electronic structure, replaces fuse and relay.
- Built-in current leakage protection.
- Also works in cars where current is supplied to the headlights in pulses.

Stock: > 1 pcs.

El.vadi

Electrical wires 1L - LP-120.
Rated voltage: 12V
Number of headlights: 1
For model: LAZER ST-Range, Triple-R Elite (Gen2), Linear.
The kit includes:
- 12V relay (in a waterproof case),
- fuse 20A,
- a terminal for connecting the battery at one end,
- 1.2 m cable for connecting the headlight,
- an additional switch for turning on / off the independent operation of the high beam.
Allows the use of LED Lazer lamps either in parallel with standard vehicle lighting or via an independent switch that can be installed inside your vehicle.
Compatible with:
ST Evolution (All Products)
Triple-R 750 Elite (Gen2)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (Gen 2)
Linear-6 (Std / Elite)
Linear-12 (Std / Elite)
Linear-18 (Std / Elite)
Linear-36
Linear-42
Linear-48

Stock: > 1 pcs.

El.vadi

1605-WK069.
Powerful wiring kit for connecting one additional lamp.
Suitable for OPTIBEAM SUPER CAPTAIN RAGE and DUAL 800 lamps.
Package included:
- Relay 12V 60A - 1 pcs.
- Relay 24V 40A - 1 pcs.
- Fuses: 30A - 1 pcs., 50A - 1 pcs.
- Couplings - 2 pcs.
- Coupling collars - 2 pcs.

Stock: > 1 pcs.

LAZER CAN contactless reader

Stock: > 1 pcs.

El.vadi

A set of electrical wires for connecting 2 Lazer LED spotlights with built-in position lights, code LAZER 2L-LP-PL-120.
Included:
- Relay 12 V (in a waterproof case).
- Fuse 30 A,
- Flexible cable 1.2 m long.
It has a battery terminal on one end and an optional headlight on/off switch that needs to be installed inside the car.
The relay holder meets the IP53 standard when installed in a vertical position.
The product is specially designed for Lazer LED lights.
Compatible with:
Triple R 750 (Generation 2)
Triple R 850 (Generation 2)
Triple R 1000 (Generation 2)
Triple R 1250 (Generation 2)
Linear-12 Elite (with position light)
Linear-18 Elite (with position light)
Sentinel (standard with position light).

Stock: 0 pcs.

Vadu komplekts papildlukturiem

LB0062-2.
Wiring harness for connecting 2 work lights and LED panels.
They are equipped with a switch, a connection socket, a 12 V relay and a fuse.
Options:
- Wire length: 2x 2.5 m.
- Maximum light power: 120W.
- Voltage: 12V.
- Relay: 12V, 40A.
- Fuse: 30A.

Stock: > 1 pcs.