Towbars spare parts

Piekabes āķa sijas stiprinājumi

Trailer hook beam 2067 fasteners for Iveco Daily Van 7/9/11m² 2014-
Wheel base 3520 - double wheels.

Stock: 0 pcs.

Piekabes āķa sijas stiprinājumi

Trailer hook beam 2067 fasteners for Iveco Daily Van 7/9/11m² 2014-
Wheel base 3000 + 3520 - 1 wheel.

Stock: 0 pcs.

Hook tow bar with thread

Stock: 0 pcs.

Sakabes āķa gals

KL1 2X4 115
Towbar hook adapter that allows you to change the model of the hook itself on the towbar.
- the distance of fastening the towbar on the base is 45 mm between the bolts.
- Hook attachment distance at the rear horizontally 90, vertically 55 mm.
-the distance from the middle of the first hole to the plate is 115 mm.

Stock: > 1 pcs.

Piekabes āķa detaļa

Trailer weight: 3500 kg
Ball diameter Ø 50 mm.
The flange is fastened with two screws, with clamp
  equipped with a clamp. You can tow traditional trailers or trailers equipped with a drawbar with a loop.
The clamp provides additional protection against the uncoupling of the trailer.
The mechanism is intended for vans equipped with support beams with two holes It is certified for use in all countries of the European Union.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Sakabes āķa gals

Removable hook for a towbar from a RANGE ROVER EVOQUE
Car. supplied as an original spare part.

Stock: 0 pcs.

Rezerves daļa sakabes āķim

Lowering the towbar flange
Sizes:
- height 20.5 cm.
- width 15.5 cm.
- distance between holes: 90 mm x 50 mm.

Stock: > 1 pcs.

Sakabes āķa automāts

Tow bar.

Stock: 0 pcs.

Piekabes āķa gals

American towbar with pin, not for bike platform.
- pulling force 3500 kg.
- vertical load 100 kg.

Stock: > 1 pcs.

Sakabes āķa automāts

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Stock: > 1 pcs.

Aizbāznis

Keyhole cover for trailer hitch

Stock: 0 pcs.

Sakabes āķa automāts

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Body assembly method:
1. Attach the machine body to the drawbar beam using M12x25mm bolts as shown in the illustration.
Hook installation:
1. To secure the ball, pull the lever down until it stops.
2. Insert the ball into the body so that the pins on the ball fit into the seats in the body.
3. Release the lever. It should return to its original position, which means that the hook mechanism is correctly locked into the body.
4. Insert the cotter pin through the hole in the lever and the hole in the hook shackle.

Stock: 0 pcs.

Piekabes āķa skrūvju komplekts

Kit bolts for mounting the towbar hook 2 kpl.
-M16 x 50 mm.
-designed for attaching hooks with code
PK 2-1.

Stock: > 1 pcs.