Skid plates

Dzinēja, ātrumkārbas un radiatora aizsargs MET HYUNDAI SANTA FE

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Dzinēja un ātrumkārbas aizsargs MET AUDI Q 3

Engine and gearbox guard, code 2.1048.00.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET AUDI A 3

Engine, gearbox and radiator guard.
Suitable for AUDI A3 8V 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI USA / EU, 2012-2016.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET AUDI A 3,SEAT LEON/TOLEDO,SKODA OCTAVIA,VW BORA/GOLF

The Kolchuga engine compartment protection is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI I 40

Stock: 0 pcs.

Kartera aizsargs CITROEN C4

Guard under the bumper new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

AdBlue bākas aizsargs

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Lambda sensora un webasto aizsargs

Toyota ProAce II Verso ( 2016 - ... ) protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TRANSIT 2019-

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

AdBlue tank skid plate RENAULT TRAFIC

Skid plate for AdBlue tank RENAULT TRAFIC 5mm aluminium.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET NISSAN LEAF

Stock: 0 pcs.

Kartera aizsargs OPEL CORSA (C)

V-belt cover is new, a copy of the original.
Suitable for Opel Corsa (C) 1.0/1.2/1.4/1.6 petrol, 2000-2006.
Suitable for diesel engines.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs OPEL ASTRA (K)

The protection under the front bumper is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs OPEL VIVARO/RENAULT TRAFFIC

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: > 1 pcs.

Kartera aizsargs TOYOTA COROLLA

The crankcase is new, a copy of the original, left side.
Suitable for TOYOTA COROLLA SED/KOMBI 1.4/2.0/NDE120 2.0/CDE120, diesel, 2004-2007.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs TOYOTA COROLLA

The crankcase is new, a copy of the original, right side.
Suitable for TOYOTA COROLLA SED/KOMBI 2.0/CDE120, diesel, 2004-2007.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs TOYOTA COROLLA

The crankcase is new, a copy of the original, right side.
Suitable for TOYOTA COROLLA SED / KOMBI 1.4/NDE120, diesel, 2004-2007.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

kartera aizsargs BMW Z4 (E89)

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs AUDI A 6

The protection under the front bumper is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs VW SHARAN II

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: > 1 pcs.