Skid plates

Dzinēja, ātrumkārbas aizsargs MET MERCEDES BENZ VIANO

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Kompozītmateriāla lambda sensora aizsargs Toyota ProAce II

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs VOLVO S 60/V 70

The protection under the front bumper is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: > 1 pcs.

Under engine cover OPEL INSIGNIA

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs AL

Aluminium 6mm skid plate for Toyota Hilux 4WD (Transfer case +adblue+oxygen sensor) (2.4 TDI Euro6 approved) (2015-) + fitting kit

Stock: 0 pcs.

Engine, gearbox protection MET MERCEDES BENZ VITO

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Kartera aizsargs VOLVO S 60/V 70

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: > 1 pcs.

Kartera aizsargs AL 5mm MAN TGE,VW CRAFTER

Under engine cover 5mm aluminium.

Stock: 0 pcs.

Protection of the engine and gearbox MET TOYOTA RAV 4 HYBRID

Stock: 0 pcs.

Dzinēja un ātrumkārbas aizsargs MET BMW 5(G30)

Engine and gearbox protection, code 2.1012.00.
Suitable for BMW 5 G30, 4x4, 2017.- .
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja un ātrumkārbas aizsargs MET BMW 3(G20)

Engine and gearbox protection, code 2.1057.00.
Suitable for BMW 3 G20 330i, 2019.- .
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine and gearbox protection MET CITROEN C3/C 4 CACTUS

Stock: 0 pcs.

Dzinēja un radiatora aizsargs MET BMW 1(F20/F21)

Engine and radiator protection, code 2.0917.00.
Suitable for BMW 1 F20 / F21 (118i), 2015-2017.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET HYUNDAI SANTA FE

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Dzinēja un ātrumkārbas aizsargs MET AUDI Q 3

Engine and gearbox guard, code 2.1048.00.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET AUDI A 3

Engine, gearbox and radiator guard.
Suitable for AUDI A3 8V 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI USA / EU, 2012-2016.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET AUDI A 3,SEAT LEON/TOLEDO,SKODA OCTAVIA,VW BORA/GOLF

The Kolchuga engine compartment protection is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI I 40

Stock: 0 pcs.

Kartera aizsargs CITROEN C4

Guard under the bumper new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

AdBlue bākas aizsargs

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.