Skid plates

Order by:
 
 
Kategorijas filtri:
Car brand
Product Code Price Number
Kartera aizsargs AL TOYOTA PROACE/PROACE VERSO,CITROEN JUMPY,PEUGEOT EXPERT

Under engine cover aluminium.
- 5 mm.

Stock: 0 pcs.

826410

Price: 299.00 €

Add to cart

View

Ātrumkārbas aizsargs MET SUZUKI JIMNY

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

2.0956.00

Price: 299.00 €

Add to cart

View

Kartera aizsargs AL FORD RANGER RAPTOR

Crankcase guard for Ford Ranger Raptor 2023-.
Designed to protect the gearbox cover.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gear cover guard is only one part of the crankcase guard kit (OPAK026ALU) but can be used without the need to mount other parts.

Stock: 0 pcs.

OPA093ALU

Price: 300.00 €

Add to cart

View

Engine protection CHEVROLET EPICA/DAEWOO EVANDA

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0404

Price: 302.00 €

Add to cart

View

Engine protection BMW X5 (E53)

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0218

Price: 304.00 €

Add to cart

View

Kartera aizsargs AL MERCEDES BENZ SPRINTER

Rear wheel drive models

Stock: 0 pcs.

4158

Price: 305.00 €

Add to cart

View

Kompozītmateriāla motora aizsargs FORD TRANSIT/TOURNEO CUSTOM/TRANSIT CUSTOM

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z1020

Price: 307.00 €

Add to cart

View

Kompozītmateriāla motora aizsargs CHRYSLER PACIFICA

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0514

Price: 308.00 €

Add to cart

View

Engine protection NISSAN NAVARA/NP 300

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z1916

Price: 308.00 €

Add to cart

View

Engine protection BMW 3 (F31)

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0225

Price: 309.00 €

Add to cart

View

Engine protection BMW X5 (E70)

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0227

Price: 309.00 €

Add to cart

View

Under engine cover aluminium RENAULT RENAULT KANGOO 22 -/ MB CITAN 22 -

Under engine cover aluminium.
- 5 mm.
Does not fit on E-Tech Kangoo

Stock: 0 pcs.

818040

Price: 310.00 €

Add to cart

View

Kartera aizsargs AL NISSAN NAVARA /PATHFINDER

Crankcase protection - front / protection of the engine crankcase, axle and clutch rod OPA064ALU.
- For NISSAN NAVARA (D40) /PATHFINDER (R51), 2005-2010 (for all engine versions).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK016ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

OPA064ALU

Price: 310.00 €

Add to cart

View

Reduktora aizsargs AL 5mm FORD RANGER 2023-/VW AMAROK 2023-

Differential guard 5mm aluminium.

Stock: 0 pcs.

R23-R2305A-DIFF

Price: 310.00 €

Add to cart

View

Kompozītmateriāla motora aizsargs SUBARU OUTBACK

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z2719

Price: 310.00 €

Add to cart

View

Under engine cover aluminium TTOYOTA LAND CRUISER 250 2024+

Aluminum bottom guard for: Toyota Land Cruiser J250, model year 2024+

Consists of:
- reducer skid plate (OPA116).

Also available separately:
- engine guard (OPA114),
- gearbox protector (OPA115),
- fuel tank skid plate (OPA117).

Made of 6mm thick aluminum.

A set of mounting screws is supplied with the protector, and it is mounted in the original mounting locations on the vehicle frame.

Underbody protectors are designed for specific models of off-road vehicles and provide ideal protection of the vehicle against mechanical damage to the chassis. During their design, off-road and difficult conditions are taken into account. Thanks to our many years of experience, we are able to offer professional solutions.

The product is designed and manufactured in Poland.

Stock: 0 pcs.

OPA116

Price: 310.00 €

Add to cart

View

Kompozītmateriāla motora aizsargs HYUNDAI KONA ELECTRIC

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z1219-2

Price: 313.00 €

Add to cart

View

Kartera aizsargs AL VW AMAROK

Crankcase protection for Volkswagen Amarok, 2009- (all engine versions).
Designed for the protection of the reducer.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gear cover guard is only one part of the crankcase guard kit OPAK006ALU but can be used without the need to install other parts.

Stock: 0 pcs.

OPA025ALU

Price: 315.00 €

Add to cart

View

Kartera aizsargs AL JEEP WRANGLER

Crankcase protection- engine and gearbox protection, OPA087ALU.
- JEEP WRANGLER, 2018- (for engines 2.0L, 2.2L).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The engine and gearbox protection is only one part of the crankcase guard kit (OPAK025ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

OPA087ALU

Price: 315.00 €

Add to cart

View

Kompozītmateriāla motora aizsargs TOYOTA LAND CRUISER 150

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z2919-35

Price: 315.00 €

Add to cart

View