Skid plates

Under engine cover aluminium Toyota Land Cruiser 250 2024+

Aluminum bottom guard for: Toyota Land Cruiser J250, model year 2024+

Consists of:
- fuel tank skid plate (OPA117).

Also available separately:
- engine guard (OPA114),
- gearbox protector (OPA115),
- reducer skid plate (OPA116).

Made of 6mm thick aluminum.

A set of mounting screws is supplied with the protector, and it is mounted in the original mounting locations on the vehicle frame.

Underbody protectors are designed for specific models of off-road vehicles and provide ideal protection of the vehicle against mechanical damage to the chassis. During their design, off-road and difficult conditions are taken into account. Thanks to our many years of experience, we are able to offer professional solutions.

The product is designed and manufactured in Poland.

Stock: 0 pcs.

Kartera aizsargs AL

Aluminium 6mm skid plate for Toyota Hilux 4WD (Transfer case +adblue+oxygen sensor) (2.4 TDI Euro6 approved) (2015-) + fitting kit

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 150

Under engine cover aluminium 5mm, long version
(0.73x1.9x0.12 m)

Stock: > 1 pcs.

Kartera aizsargs AL FORD RANGER

Crankcase guard rear part
Protects the gearbox
material aluminum-5 mm
weight 12 kg
Comes with everything necessary for installation

Stock: > 1 pcs.

Kartera aizsargs AL FORD RANGER 2023-/VW AMAROK 2023-

Crankcase guard rear part.
- Protects the gearbox.
- Material: Aluminum - 5mm.
- Weight 18 kg.
- Comes with everything needed for installation.

Stock: 0 pcs.

Skid plate FORD TRANSIT CUSTOM

Skid plate. Under engine cover aluminium

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD F 150

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ SPRINTER

(4x4 2018-2022) models

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 250 2024+

Aluminum bottom guard for: Toyota Land Cruiser J250, model year 2024+
Consists of:
- engine skid plate (OPA114),
Also available separately:
- gearbox protector (OPA115),
- reducer guard (OPA116),
- fuel tank skid plate (OPA117).
Made of 6mm thick aluminum.
A set of mounting screws is supplied with the protector, and it is mounted in the original mounting locations on the vehicle frame.
Underbody protectors are designed for specific models of off-road vehicles and provide ideal protection of the vehicle against mechanical damage to the chassis. During their design, off-road and difficult conditions are taken into account. Thanks to our many years of experience, we are able to offer professional solutions.
The product is designed and manufactured in Poland.

Stock: 0 pcs.

Kartera aizsargs AL 5mm MAN TGE,VW CRAFTER

Under engine cover 5mm aluminium.
-suitable for 4x4 models.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ SPRINTER

Under engine cover AL-for front and rear wheel drive models.
- 5 mm.

Stock: > 1 pcs.

Engine protection NISSAN NAVARA

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs MITSUBISHI L 200

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection VW AMAROK

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 250

METEC aluminum engine guard for Toyota Land Cruiser 250 2024+ model year.
The kit protects the engine, Adblue tank, junction box and the first third of the fuel tank.
Guard weight - 29 kg,
Material - Aluminum AW5754
Material width - 5 mm.
Compatible with towing eye.
Products are approved in accordance with UNECE R26/R61 legislation.
The car's underbody guard helps prevent or reduce damage to the vehicle itself in the event of a minor collision.
Installation is carried out based on the car model - no drilling or welding is required, only standard tools are required for installation.

Fuel tank guard must be purchased separately - 83570970

Stock: > 1 pcs.

Kartera aizsargs AL

Skid plate radiator + engine
-6 mm Alu.

Stock: 0 pcs.

Kartera aizsargs AL DODGE RAM

Crankcase protection - front/engine and axle crankcase protection, OPA054ALU.
- For DODGE RAM 1500, 2019-
- Material: aluminum 6 mm thick.
It is installed on cars with an original factory bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase and axle guard is only one part of the OPAK012ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL DODGE RAM

Crankcase protection - gearbox/reducer protection,OPA055ALU.
- For DODGE RAM 1500, 2019-
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox/reducer protection is only one part of the OPAK012ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER

Aluminum skid plate for VW Amarok 2023 and Ford Ranger 2023
Specifications:
Weight: 24.0 kg
Material: AW5754
Aluminum width: 5 mm
Product compliance: Valid according to UNECE R26/R61
Engine, gearbox and transfer case protection.

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA HILUX

Set of crankcase protection for TOYOTA HILUX VIGO, 2005-2011 (for all engine versions).
Material: aluminum 6 mm thick.
The kit consists of:
- engine crankcase protection (OPA010LU).
- gearbox/reducer protection (OPA043ALU).
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.