Skid plates

Order by:
 
 
Kategorijas filtri:
Car brand
Product Code Price Number
Engine protection AUDI Q 7

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0115

Price: 355.00 €

Add to cart

View

Kartera aizsargs AL Dodge RAM

Crankcase protection 804160.
- DODGE RAM, 2019- (all models).
- Protection of the engine compartment.
- Material: aluminum 5 mm thick.
The kit contains all the necessary elements for installation.

Stock: > 1 pcs.

804160

Price: 355.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA HILUX REVO

Crankcase protection - reducer protection, OPA069ALU.
- For TOYOTA HILUX REVO, 2015 - (for all engine versions).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The reducer protection is only one part of the crankcase guard kit (OPAK017ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

OPA069ALU

Price: 358.00 €

Add to cart

View

Dzinēja, ātrumkārbas un radiatora aizsargs AL VW T 5/T 6

Engine protection VW T 5 / T 6 aluminum 3mm.

Stock: 0 pcs.

3.0307.00

Price: 360.00 €

Add to cart

View

Engine protection FIAT FREEMONT

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z0907

Price: 364.00 €

Add to cart

View

Kartera aizsargs AL FORD RANGER RAPTOR

Crankcase guard for Ford Ranger Raptor 2023-.
Designed to protect the radiator.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The radiator guard is only one part of the crankcase guard kit (OPAK026ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

OPA090ALU

Price: 365.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA LAND CRUISER 200

Crankcase protection for Toyota Land Cruiser J200, 2007- , diesel.
Front crankcase and axle protection.
Material: aluminum 6 mm thick.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.
The crankcase and axle guard is only one part of the crankcase guard kit (OPAK011ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

OPA056ALU

Price: 365.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA LAND CRUISER 100, LEXUS LX470

Crankcase protection - front/engine crankcase protection, OPA089ALU.
- TOYOTA LAND CRUISER 100, LEXUS LX470, 1998-2007 (for all engines)
- Material: aluminum 6 mm thick.
It is installed on cars with an original factory bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK027ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

OPA089ALU

Price: 365.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA LAND CRUISER 100, LEXUS LX470

Crankcase protection - gearbox/reducer protection, OPA095ALU.
-TOYOTA LAND CRUISER 100, LEXUS LX470, 1998-2007 (petrol engines)
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK027ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

OPA095ALU

Price: 365.00 €

Add to cart

View

Under engine cover aluminium FORD RANGER 2023-/VW AMAROK 2023-

Crankcase protection AL- 5mm.

Stock: 0 pcs.

RAPTOR-R2305A-ENG

Price: 365.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA RAV 4

Under engine cover aluminium.
-мade of special 5 mm technical aluminum.
-Installed on the original attachment points.
- all accessories included.

Stock: 0 pcs.

835690

Price: 365.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA HILUX

Crankcase protection - engine and axle crankcase protection, OPA010ALU.
- For TOYOTA HILUX VIGO, 2005-2015 (for all engine versions).
- Material: aluminum 6 mm thick.
Installed on cars with original factory bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK002ALU/OPAK014ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

OPA010ALU

Price: 370.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA LAND CRUISER 120

Crankcase protection - engine crankcase protection, OPA027ALU.
- For Toyota Land Cruiser J120/J125, 2002-2009 (long and short base).
- Material: aluminum 6 mm thick.
It is installed on cars with Z001 bumper, cars with original factory bumper require OPA007ALU crankcase protection.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK001ALU-A kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

OPA027ALU

Price: 375.00 €

Add to cart

View

Kartera aizsargs AL FORD RANGER

Crankcase protection for FORD RANGER(T6/T7), 2011- (for all engine versions).
Designed to protect the engine crankcase and axle.
Designed for installation on cars under the original factory bumper.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.
The front crankcase and axle guard OPA041ALU is only one part of the crankcase guard kit OPAK011ALU but can be used without the need to install other parts.

Stock: 0 pcs.

OPA041ALU

Price: 379.00 €

Add to cart

View

Kartera aizsargs AL VW TRANSPORTER T5, T6, T6.1

Crankcase protection - rear axle protection protection, OPA052ALU.
- For VW TRANSPORTER T5, T6, T6.1 (4Motion version)
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.

Stock: 0 pcs.

OPA052ALU

Price: 380.00 €

Add to cart

View

Kompozītmateriāla motora aizsargs SUBARU FORESTER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Sorry
Image not available

Z2717

Price: 381.00 €

Add to cart

View

Under engine cover aluminium MERCEDES BENZ VITO/V-klasse (W447)

Mercedes-Benz V-Klasse / Vito
-designed for 4x4 models
Under engine cover aluminium
Weightt: 19,5kg
Time of mounting: 60min

Stock: > 1 pcs.

818722

Price: 382.00 €

Add to cart

View

Kartera aizsargs AL Dodge RAM

Crankcase protection 804161.
- DODGE RAM, 2019- (all models).
- Protection of the transfer case and gearbox.
- Material: aluminum 5 mm thick.
All items required for installation are included in the kit.
Not suitable for diesel engines.

Stock: > 1 pcs.

804161

Price: 385.00 €

Add to cart

View

Kartera aizsargs AL TOYOTA LAND CRUISER 200

Crankcase protection for Toyota Land Cruiser J200, 2007- , diesel.
Designed to protect the fuel tank.
Material: aluminum 6 mm thick.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.

Stock: 0 pcs.

OPA060ALU

Price: 389.00 €

Add to cart

View

Engine protection TOYOTA HI-LUX

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z2916

Price: 394.00 €

Add to cart

View