All products

LED tactical flashlight

LA0200- LED tactical flashlight.

Stock: > 1 pcs.

LED tactical flashlight

LA0209- LED tactical flashlight.

Stock: 0 pcs.

Auto sakabes āķis AUDI A7

AUDI A7 2018+
VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Paklājs bagāžniekā TOYOTA LAND CRUISER J250

Approximate product dimensions (cm):116 x 109/128.
Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Paklāji salonā gumijas TOYOTA LAND CRUISER J250

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Instrumentu komplekts

RT2007 - Tool kit 94 elements .

Stock: > 1 pcs.

Knaibļu komplekts

Pliers set 4 pcs.
-wire cutters 160 mm
-needle nose pliers 160 mm
-diagonal pliers 160 mm
- curved pliers 160 mm
Steel body, rubber handle.

Stock: > 1 pcs.

Griezes momenta atslēga

Code RT0019
Torque wrench 19-110Nm 3/8'

Stock: > 1 pcs.

Griezes momenta atslēga

RT0018
Torque wrench set 28-210 Nm 1/2'
Includes heads for 17/19/21

Stock: 0 pcs.

El.vadi

Two-Lamp wiring kit for Lazer Lamps High Performance LED lights. The setup is quick, easy, and reliable with 2-pin Deutsch connection and no configuration procedures. The kit features a 12V relay (in waterproof housing), fuse, a battery terminal at one end, and 6.5m of flex on the lamp cable, and allows for the operation of Lazer products either in parallel with the standard lighting on the vehicle, and/or via an independent switch which can be mounted inside your vehicle.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.
Compatible with:
Linear-24 Flood
Utility-25
Utility-25 MAXX
Utility-45
Utility-50
Utility-80 HD (Heavy Duty)
RP Spot

Specifications:
6.5m cable lengths
Includes 12V relay and 20 amp fuse
Relay holder approved to IP53 when mounted in a vertical (upright) orientation
2-pin deutsch connections
Includes on/off switch for independent operation
Braided cable sections for added protection in engine bay

Stock: > 1 pcs.

Rezerves ritenis un instrumentu komplekts

RR5x112x57.1 125/70R18 kpl - spare wheel - dock and tool set.
- Size: 125/70R18.
- Distance between bolts: 5 x 112mm x 57.1mm.
В комплект:
- spare wheel
- a trapezoidal jack with a ratchet mechanism and a case for its storage,
- telescopic wheel wrench, extendable (up to 50 cm), with four heads: 17, 19, 21, 23 mm,
- a case for a wheel, equipped with a velcro fastener for fastening to the floor of the trunk,
- 1 pair of work gloves.

Stock: 0 pcs.

Dubļu aizsargi (kompl.) SKODA SUPERB III

Mud flaps: SKODA SUPERB III B8 2015-2019
The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray.
Color: matte black.
Installation is made on regular seats of the car.
The main purpose: to protect the lower part of the car body from chipping, scratching.
With such model mud flaps on your car, you will get rid of such problems as:
- dirt on the bottom of the car,
- intense pollution of the side of the car, starting from the front wings,
- reduction of accumulated dirt or snow on the vehicle’s rapids.

Stock: 0 pcs.

Numura apgaismojums

License plate light bulbs for passenger cars-EP18
AUDI A1 2010 –
AUDI A3 8P 2004 – 2011
AUDI A4 B6 2000 – 2004
AUDI A4 B7 2004 – 2008
AUDI A6 C6 2005 – 2010
AUDI A7 2010 –
AUDI A8 2003 2009 USA
AUDI RS4 2006 – 2008
AUDI RS6 PLUS AVANT 2008 – 2009
AUDI Q7 2007 – 2012

Stock: 0 pcs.

Auto sakabes āķis VW PHAETON

Tow bar VOLKSWAGEN Phaeton, 4dv, 2002-
VERTICAL DETACHABLE TOWBAR

Stock: 0 pcs.

Eļļas filtra noņemšanas atslēga

Stock: 0 pcs.

Kit CRUZ Optiplus

Kit CRUZ Optiplus Volvo S60 sedan 4d (00-10)

Stock: 0 pcs.

Kapota aizsargs Ford Transit

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams for less contamination of the wind shield and wiper blades. Aerodynamic design guarantee uplifting of an air flow as also it gives additional identity to your car. Made from firm acrylic glass, is absolutely safe to wash and don't need additional service. Deflector fixations design to exclude hood damaging and drilling.

Stock: > 1 pcs.

Kit Optiplus

Kit 6 supports CRUZ LCV Vivaro/Trafic (14--) - Talento/NV300 (16--) H1

Stock: 0 pcs.

Jumta šķērsstieņi

Car roof crossbars CRUZ CR 923-068
Made of galvanized steel
The design of the supports and covers is made of ABS.
Safer and more aerodynamic.
Innovative tension system built into the rods.
All types of accessories are easy to install.
If desired: a set of 4 anti-theft locks (code 932-014-15).
Included: 3 pcs.

Stock: 0 pcs.

Dubļu aizsargi (kompl.) LEXUS CT 200h

Mud flaps: LEXUS CT 200h 2014-2022
The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray.
Color: matte black.
Installation is made on regular seats of the car.
The main purpose: to protect the lower part of the car body from chipping, scratching.
With such model mud flaps on your car, you will get rid of such problems as:
- dirt on the bottom of the car,
- intense pollution of the side of the car, starting from the front wings,
- reduction of accumulated dirt or snow on the vehicle’s rapids.

Stock: 0 pcs.