All products

Lukturu stiklu pulēšanas komplekts

Set for polishing and restoring car headlights.
The set is designed to restore heavily faded, yellowed headlights to their original shine and to improve the quality of headlight illumination.
The set includes:
- sandpaper, grain size P800: 2 pcs.
- sandpaper, grain size P1200: 2 pcs.
- sandpaper, grain size P2000: 2 pcs.
- 2 sponges: 1 white and 1 orange.
- polishing paste: 1 tube x 85 g.
- UV protective liquid: 2 x 3 ml.
- masking tape (300 * 2 cm): 1 pc.
- holder: 1 pc.
- adapter with M10 thread: 1 pc.
Electric polishing machine is not included.

Stock: > 1 pcs.

Avārijas slēdzis

03028-safety switch
Safe operation: On/Off 2 positions, operating voltage 12-24 V, rated current 275 A, maximum peak current 1000 A. Connection - M10.
Voltage: 12/24V.
For use in the electrical systems of passenger cars, trucks, agricultural and construction machinery, caravans, motorboats, etc., where the ability to disconnect the power supply is required.
Disconnection - With one simple hand movement, the ground circuit is interrupted, for example:
before any type of repair,
during extended vehicle storage,
when charging the battery with a charger without removing it from the vehicle.
Application:
The switch is used to quickly disconnect the power supply in vehicles.
It can act as an anti-theft device or a quick emergency disconnection.
The product is also useful in various types of car rallies.

Stock: > 1 pcs.

mobīlā telefona turētājs

anti-slip coating for mobile phones while driving
- no problems with work while driving
- anti-reflective coating and flexible design
-19X22 CM

Stock: > 1 pcs.

Aizmugures lukturis LED

Universal LED rear light 12-30V, right, 6-function, STOP / PARKING LIGHT / TURN SIGNAL / REVERSE / FOG LIGHT without license plate light with 1 m wire.

Stock: > 1 pcs.

Aizmugures lukturis LED

Universal LED rear light 12-30V, left, 6-function, STOP / PARKING LIGHT / TURN SIGNAL / REVERSE / FOG LIGHT without license plate light with 1 m wire.

Stock: > 1 pcs.

Aizmugures lukturis LED

Universal LED rear light 12-30V, left, 7-function, STOP / PARKING LIGHT / TURN SIGNAL / REVERSE / FOG LIGHT with license plate light and 1 m wire.

Stock: > 1 pcs.

Aizmugures lukturis LED

Universal LED rear light 12-30V, right, 7-function, STOP / PARKING LIGHT / TURN SIGNAL / REVERSE / FOG LIGHT with license plate light and 1 m wire.

Stock: > 1 pcs.

Gabarīta lukturis LED

Two-functional LED outline and marker light, 12-30 V, pendant version, 2×0.75 mm2 cable, 0.5 m long.

Stock: > 1 pcs.

LED clearance lamp

Stock: > 1 pcs.

LED clearance lamp

Stock: > 1 pcs.

LED gabarīta lukturis

12-30V LED yellow clearance light with reflector, bracket, and cable.
ADR-certified.

Stock: > 1 pcs.

Rokas vinča

43154 - manual winch, 4T.
Designed for horizontal movement of loads during installation and dismantling, repair and other work in production and at home.
Maximum load (kg): 4000

Stock: 0 pcs.

Rezerves ritenis

Compact spare wheel RR135/80 R17 5x100x56.1
- Size: 135/80 R17.
- Bolt spacing: 5 x 100mm x 56.1mm

Stock: 0 pcs.

Spārnu paplšinājuma kompl

Wheel arch extensions - Ford Ranger 2011 - 2018
Extension kit for installation in: Ford Ranger 2011 - 2018
- color - black
-material - ABS

Stock: 0 pcs.

Dzinēja un ātrumkārbas aizsargs MET Kia Sorento

The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja un ātrumkārbas aizsargs Kia Sorento

The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs Mercedes Benz Sprinter

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kapota aizsargs MB VITO/V-class

The hood deflector is designed specifically for the indicated vehicle model, ensuring an accurate fit and precise alignment with the edges of the hood. It protects the hood area from minor mechanical damage while also serving as a stylish decorative element. The deflector is made of durable plastic and is mounted using special brackets without adhesive. It does not feature any inscriptions or stickers indicating the vehicle model. The deflector is black in color and its shape fully matches the specified vehicle.

Stock: 0 pcs.

Aizsargstienis KIA Sorento

EC 'A' bar with cross bar and axle-bar - KIA Sorento (2012 - 2015)
STEELER® Stainless steel protection bars - KIA Sorento has been designed in such way to emphasize the individual character of your car.
Protection bars in large, 70mm diameter and 2 mm thickness are made of stainless steel and are polished by hand to ensure the sustainability and give additional protection for the integral elements of the vehicle. Solid front bar protects the lower part of your bumper and gives the truck an aggressive, off-road appearance.
With protection bars we add a complete mounting set and easy installation instructions for your car.
Front bar has got an European approval - has been designed according to the latest EU standards and with the requirements of Directive 78/2009 / EC. This means that our products are manufactured with the highest standards of safety and have successfully passed all certification tests in terms of pedestrian’s safety.
If you want to make your KIA Sorento stands out from the crowd while preserving its perfect form, you should invest in our protection bars without a doubt.
Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry
We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.
Bar diameter: 70 mm
Crossbar diameter: 60 mm
Thickness: 2 mm
Weight: 16,1 kg

Stock: 0 pcs.

Riteņa arkas aizsargs

Wheel arch liners for front-wheel drive vehicles..
- Made of high-quality and durable ABS plastic 3 mm thick.
- 2 pcs. in a set (left and right sides).
- Color: light ash (also available in black).
- Perfectly match the shape of the wheel arch.
- Protect wheel arches from impacts, scratches and corrosion.
- Resistant to temperature and moisture.
- Quick and easy installation.

Stock: > 1 pcs.