Instruments

Wheel lug wrench

Wheel lug wrench

Stock: 0 pcs.

Wrecking bar

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Kombinēta sprūdatslēga

>Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
>Has a standard open end profile and 12-point box end working profile.
>Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °.
>Heat treated to hardness 39-41 HRC.
>Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Kombinēta sprūdatslēga

>Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
>Has a standard open end profile and 12-point box end working profile.
>Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °.
>Heat treated to hardness 39-41 HRC.
>Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Combination ratchet wrench

Stock: 0 pcs.

Sastiprināšanas bļoda metāla magnēta

Stock: 0 pcs.

Portable lamp

Stock: > 1 pcs.

Gaisa pūšamā pistole

BLOW OFF GUN
It is used for removing dirt from units and mechanical device by compressed air flow.
It is eqquiped with quick connector.

Stock: 0 pcs.

Eļļotājs

OIL CAN 300ML METAL (FLEXIBLE END)
Used for oiling friction units with liquid lubricants which do not require supply under pressure.
Equipped with spout.

Stock: 0 pcs.

Kombinēta atslēga

Spanner is made by the hot stamping method (forging hammers).
Has a standard open end profile and 12 point box end profile.
Material – chrome-vanadium tool steel CRV6150.
Protected from corrosion by chrome coating with matt surface effect.

Stock: 0 pcs.