Instruments

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Kombinēta sprūdatslēga

>Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
>Has a standard open end profile and 12-point box end working profile.
>Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °.
>Heat treated to hardness 39-41 HRC.
>Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Kombinēta sprūdatslēga

>Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
>Has a standard open end profile and 12-point box end working profile.
>Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °.
>Heat treated to hardness 39-41 HRC.
>Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Combination ratchet wrench

Stock: 0 pcs.

Sastiprināšanas bļoda metāla magnēta

Stock: 0 pcs.

Portable lamp

Stock: > 1 pcs.

Riepu pumpēšanas pistole

PRESSURE GAUGE 10 ATM WITH HOSE
Membrane-type pressure gage with scale in psi and bar.
It is used to display and test the pressure of non-aggressive and not crystallising fluids (liquids, gases).
It can be used for tire pressure monitoring.
It is protected against mechanic damage with rubber cover.
The range of measured pressure from 0.05 to 12 MPa.
Accuracy class — 5,0.
Body diametr — 65 mm.

Stock: 0 pcs.

Gaisa pūšamā pistole

BLOW OFF GUN
It is used for removing dirt from units and mechanical device by compressed air flow.
It is eqquiped with quick connector.

Stock: 0 pcs.

Eļļotājs

OIL CAN 300ML METAL (FLEXIBLE END)
Used for oiling friction units with liquid lubricants which do not require supply under pressure.
Equipped with spout.

Stock: 0 pcs.

Kombinēta atslēga

Spanner is made by the hot stamping method (forging hammers).
Has a standard open end profile and 12 point box end profile.
Material – chrome-vanadium tool steel CRV6150.
Protected from corrosion by chrome coating with matt surface effect.

Stock: 0 pcs.

Kompresors

AIR COMRESSOR
-250psi
-constant working time 10 minutes.
-constant working time if the pressure is more than 5 bar - 5 minutes.
Pause 10 minutes.
Not intended for pumping wheels of agricultural machinery.
Power supply 12 and 220 volts.

Stock: 0 pcs.

Krusta ratatslēga

Cross ratchet 17x19x21x23

Stock: > 1 pcs.

Krusta ratatslēga

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
It has standart hex working profile.
Rods are made by resistance welding and reinforced with the steel riveted pad.
Reduced arm length and wrench rod diameter.
Protected against corrosion by synthetic polymer coating.

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.

Steel wire brush

Stock: 0 pcs.