Instruments

Pumpšļūteņu uzgaļu komplekts

A set of tip for pumping hose

Stock: 0 pcs.

Mērlente

Measuring tape leght 7.5 m.
The shockproof rubberized case.
Three options for fixing the measuring tape.
Magnetic tip tape.
Measuring board width 2.5 cm

Stock: 0 pcs.

Akumulātora lādēšanas ierīce

Charger with microprocessor 4A IP65 TUV / GS.
Ideal for lead-acid, gel and AGM batteries.
Use - cars, ATVs, boats, mowers, scooters, motorcycles, snowmobiles and jet skis.
Microprocessor control, nine-step intelligent charging characteristics.
Stable charging function.
Diagnose and charge heavily discharged batteries.
Insulated terminals.
Battery capacity 1.2 Ah - 120 Ah
Input parameters: 220-240 VAC 50 Hz
Output parameters: 6V 2A / 12 V 2 / 4A
Battery Capacity: 1.2 Ah - 120 Ah

Stock: > 1 pcs.

LED spuldžu testeris

LED bulb tester 12 V
-60w

Stock: > 1 pcs.

Plastmasas savilcēji

Plastic ties.
-4.8 x 380 mm

Stock: > 1 pcs.

Domkrats hidrauliskis (130-345MM)

Hydraulic jack (130-345MM)
-2 tons

Stock: > 1 pcs.

Oil filter wrench jaw type

Stock: > 1 pcs.

Rokas pumpis

Hand pump

Stock: 0 pcs.

Pārnēsājamā lampa

Portable lamp

Stock: 0 pcs.

Riteņa atslēga

Wheel lug wrench 19мм

Stock: > 1 pcs.

Wheel lug wrench

Wheel lug wrench

Stock: > 1 pcs.

Wrecking bar

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.