Skid plates

Engine protection VW TOUAREG

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Reduktora aizsargs AL 5mm MAN TGE,VW CRAFTER

Differential guard 5mm aluminium.

Stock: 0 pcs.

Dzinēja, ātrumkārbas aizsargs MET TOYOTA HIGHLANDER/ LEXUS NX 450h

Crankcase protection, code 2.1177.00 - engine protection, gearbox.
Is covered by layer of zinc, paint and varnish.
The Kolchuga engine compartment protection is made of high-quality materials using modern technologies. They are based on cold-rolled steel with a thickness of 2 mm or 3 mm (depending on the car model).
Each protection has an anti-corrosion coating that protects the crankcase not only from physical impacts, but also the entire engine compartment - from water, dust, dirt, which significantly increases the service life of belts, rollers and other moving engine parts. compartment.
The protection has a unique shape that follows the shape of the bottom of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, making the installation process as simple as possible.
All necessary fasteners are included in the kit.

Stock: 0 pcs.

Engine protection MASERATI QUATTROPORTE

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection AUDI Q 5

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection AUDI Q 7/VW TOUAREG

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET KIA SPORTAGE

Code 2.1075.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 120

Crankcase protection - for the protection of the reducer, OPA009ALU.
- Toyota Land Cruiser J120/J125, 2002-2009 (long and short base), diesel.
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, the installation is carried out in the original mounts on the car frame.
The reducer guard is only one part of the OPAK001ALU/OPAK001ALU-A kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI IONIQ

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET KIA SPORTAGE

Code 2.0645.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Engine, gearbox and radiator protection MET HYUNDAI H 1

Stock: 0 pcs.

Engine, gearbox and radiator protection MET KIA CEED

Stock: 0 pcs.

Engine, gearbox and radiator protection MET LEXUS IS 250

Stock: 0 pcs.

Engine, gearbox and radiator protection MET LEXUS IS 250

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Stock: > 1 pcs.

Engine, gearbox and radiator protection MET MERCEDES BENZ VITO/VIANO

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET HYUNDAI TUCSON

Code 2.0640.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET BMW 1 (E87)

Stock: 0 pcs.

Engine, gearbox and radiator protection MET VW PHAETON

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT

Stock: 0 pcs.