Skid plates

Dzinēja, ātrumkārbas un radiatora aizsargs MET TOYOTA LAND CRUISER 150

TOYOTA LAND CRUISER 150 2009-
Engine: V-2.7i, 3.0D
Gearbox: Automatic
Material: 2 mm steel.
Fasteners: A complete set of fasteners

Stock: > 1 pcs.

Kompozītmateriāla motora aizsargs MERCEDES BENZ R-klasse (W251)

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection VW CRAFTER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection CHRYSLER TOWN & COUNTRY

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection OPEL MOVANO

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection FORD TRANSIT

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs FORD TRANSIT

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection RENAULT MASTER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 150

Crankcase protection - to protect the gearbox, OPA0033ALU.
Designed for car models:
- Toyota Land Cruiser J150, 2017-, diesel.
- Toyota Land Cruiser 150, 2014-2017, diesel.
- Toyota Land Cruiser J150, 2009-2014, diesel.
Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox guard is only one part of the set (OPAK021ALU/OPAK009ALU/OPAK007ALU/OPAK007ALU-A) but can be used without the need to mount other parts.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER RAPTOR

Crankcase guard for Ford Ranger Raptor 2023-.
Designed to protect the gearbox.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox guard is only one part of the crankcase guard kit (OPAK026ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ X-CLASS

Crankcase protection - front/engine crankcase protection, OPA022ALU.
- For MERCEDES BENZ X-CLASS, 2017-, 2.3L engine (not suitable for 3.0L engine).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK005ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER

Textile floor mats - made from special auto textile material. Good protection from dust and

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs ALFA ROMEO 159

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL Isuzu D-Max

Engine protection.
- material aluminum-5 mm
- products are valid according to UNECE R26/R61 legislation
- comes with everything necessary for installation.
-does not fit with hydraulic steering column!
- weight 6.9 kg

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT/TRANSIT CUSTOM

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER RAPTOR

Crankcase guard for Ford Ranger Raptor 2023-.
Designed to protect the engine crankcase and axle.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase and axle guard is only one part of the crankcase guard kit (OPAK026ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 200

Crankcase protection for Toyota Land Cruiser J200, 2007- , diesel.
Designed for gearbox cover.
Material: aluminum 6 mm thick.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.
The gear cover guard is only one part of the crankcase guard set OPAK011ALU but can be used without the need to mount other parts.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA HILUX REVO

Crankcase protection - gearbox protection, OPA068ALU.
- For TOYOTA HILUX REVO, 2015 - (for all engine versions).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox protection is only one part of the crankcase guard kit (OPAK017ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL JEEP WRANGLER

Crankcase protection- front/ radiator and stabilizer protection, OPA086ALU.
- JEEP WRANGLER, 2018-(for all engine versions).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The radiator and stabilizer protection is only one part of the crankcase guard kit (OPAK025ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ X-CLASS

Crankcase protection - front/engine crankcase protection, OPA058ALU.
- For MERCEDES BENZ X-CLASS, 2017-, 3.0L engine (not suitable for 2.3L engine).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK015ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.