Skid plates

Engine, gearbox and radiator protection MET CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Stock: 0 pcs.

Engine, gearbox and radiator protection MET AUDI A 8

Stock: 0 pcs.

Engine and gearbox protection MET MITSUBISHI OUTLANDER

Stock: 0 pcs.

Engine, gearbox and radiator protection MET MITSUBISHI OUTLANDER

Stock: 0 pcs.

Engine and gearbox protection MET LANDROVER RANGE ROVER

Stock: 0 pcs.

Gearbox and transfer case protection MET TOYOTA LAND CRUISER 120

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI IONIQ

Stock: 0 pcs.

Engine, gearbox and radiator protection MET AUDI A 4/A 5

Stock: 0 pcs.

Engine, gearbox and radiator protection MET AUDI A 4/A 5

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Code 2.0687.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine, gearbox protection MET TOYOTA RAV 4

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET AUDI A 3

Engine, gearbox and radiator guard.
Suitable for AUDI A3 8V 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI USA / EU, 2012-2016.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja un radiatora aizsargs MET BMW 1(F20/F21)

Engine and radiator protection, code 2.0917.00.
Suitable for BMW 1 F20 / F21 (118i), 2015-2017.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET NISSAN NV 400,OPEL MOVANO,RENAULT MASTER

Code 2.0516.00
The Kolchuga engine compartment protection is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET VW TIGUAN

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Engine, gearbox and radiator protection MET AUDI A 6

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs AUDI A 6

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine, gearbox protection MET MERCEDES BENZ M-klasse (W163)

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT 2019-

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TRANSIT 2019-

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.