Instruments

Rievots skrūvgriezis

>Intended for professional usage and has improved strength characteristics and extended service life.
>Screwdriver has a standard slotted magnetized working profile.
>Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 >HRC and protected against corrosion by the chromium plating.
>Screwdriver hex rod is equipped with an impact part on the handle which allows to use a screwdriver for works with require greater effort.
>Two-component impact-resistant handle has rubberized anti-slippage coating.

Stock: > 1 pcs.

Screwdriver

Stock: 0 pcs.

Long nose pliers

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 72 teeth allows to rotate by 5 degree minimum angle
>Equipped with a flag switch, a quick-reset button and a holding ball
>Made by cold stamping method
>Material - chrome-vanadium steel CrV50BV30
>It is hardened to hardness not less than 39HRC
>It is chrome plated and matt finish to resist corrosion

Stock: 0 pcs.

Pagarinātas knaibles

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Tap wrench L-shaped telescopic (1/2")

>Tap wrench is made by cold stamping method
>Material – chrome-vanadium tool steel
>Equipped with a spring-loaded holding ball
>It is chrome plated and matt finish to resist corrosion
>Has a standard square drive 1/2'
>Wear-resistant, suitable for the long-term usage at max loads
>Equipped with a plastic handle with a rubber anti-slip coating

Stock: 0 pcs.

Regulējāmās plakanknaibles

>Made of chrome-vanadium steel by the hot stamping method (forging hammers).
>Equipped with comfortable rubber handles which protect the palm from slippage.
>Jaws induction hardened to 55-58 HRC.
>Protected against corrosion by phosphating.

Stock: 0 pcs.

Pagarinātas knaibles

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Kombinētās knaibles

>Made of chrome-vanadium steel by the hot stamping method (forging hammers)
>Entirely meet requirements of GOST 5547-93
>Have four working surfaces for fixing flat, round objects, for cutting edges along the plane and side cutting pliers for cutting wires
>Equipped with comfortable ergonomic two-component plastic handles with protective knurling which protects the palm from slippage
>Cutting edges are induction hardened to 55-58 HRC
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Car jack stand

Designed to hold vehicles during repair work.
- a set of one piece.
Has a ratchet mechanism with a lock for a comfortable pick height.
Maximum. load -2000 kg.
The height of the lift is 275-428 mm.

Stock: > 1 pcs.

Skrūvgriezis Torx

Intended for professional usage and has improved strength characteristics and extended service life.
Screwdriver has a Phillips cross magnetized working profile.
Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 HRC and protected against corrosion by the chromium plating.
Screwdriver hex rod is equipped with an impact part on the handle which allows to use a screwdriver for works with require greater effort.
Two-component impact-resistant handle has rubberized anti-slippage coating.
-mm 3x200

Stock: > 1 pcs.

Riteņa atslēga

Wheel nut wrench
TWW-17/19mm 21/23mm

Stock: > 1 pcs.

Skrūvspīles

Vice, rotary
-150 mm
Made by precision steel casting.
They have an anvil on the body.
The base is rotary.
Varnish-and-paint coating.

Stock: 0 pcs.

Testeris piekabei

Trailer connection tester.
Check the electrical installation in the vehicle's 7-pin socket and trailer, connecting the tester between the car and the trailer.

The tester is simply connected to the plug / socket and by pressing the yellow button the device performs an electrical installation test. If all the LEDs in the device light up, it means that the installation is operational. A non-illuminating diode means that the cable is damaged.
Powered by a 9 V battery (not included).

Stock: 0 pcs.

Caurule ar sifonu, degvielas pārsūknēšanai

Tube with siphon for pumping fuel
2,5m, sifons Fi24

Stock: > 1 pcs.

Caurule ar sifonu, degvielas pārsūknēšanai

Tube with siphon for pumping fuel
14/2mm, sifons Fi14

Stock: > 1 pcs.

Caurule ar sifonu, degvielas pārsūknēšanai

Tube with siphon for pumping fuel
20/2 mm, sifons Fi20

Stock: > 1 pcs.