Instruments

Order by:
 
 
Kategorijas filtri:
Car brand
Product Code Price Number
akumulātora testeris

- accumulator tester
12V/24V

Stock: 0 pcs.

ZCB-61586/3

Price: 9.00 €

Add to cart

View

Abpusējā līmlenta

Double-sided adhesive tape 90x2cm

Stock: 0 pcs.

0810026

Price: 4.00 €

Add to cart

View

riepu spiediena mērītājs

Tyre pressure gauge metal 7,5bar

Stock: > 1 pcs.

0623403/3

Price: 9.00 €

Add to cart

View

Akumulātora lādēšanas ierīce

The DBC-4A rectifier can be used to charge lead-acid (conventional and MF), Ca / Ca, AGM and gel batteries. This is a microprocessor rectifier made in accordance with the IP65 standard, which means resistance to dust and splashes, as well as splashing with a low-pressure water jet. Has guarantees from:
-short circuit.
- reverse battery connection (reverse polarity).
-open circuit.
-protection.
- recharge the battery.
- overload rectifier.
Rectifier overheating.
Has 6 charging modes:
Batteries 6 V to 14 Ah
7.2 V to 2 A
7.4 V to 2 A (charging at low temperatures)
12 V to 14 Ah batteries and deeply discharged

14.3 V to 2 A
14.7 V to 2 A (charging at low temperatures)
12V battery above 14Ah

14.3 V to 4 A
14.7 V to 4 A (charging at low temperatures)
It shows the battery voltage and charge level on an ongoing basis and adjusts the charging current depending on its needs. After charging, FULL is displayed and the battery voltage is maintained.
Specifications:
Supply voltage 230V 50 Hz
Output voltage: 6 / 12V
Power Consumption: About 60 W (Standby 1 W)
Charging voltage:
7.4 V (for 6 V batteries)
14.7 V (for 12 V batteries)
Charging Current:
2A +/- 10%,
4A +/- 10%
Supported Battery Capacity:
6V - 1.2Ah to 14Ah
12V - 1.2Ah to 14Ah and 14Ah to 120Ah
Degree of protection: IP65
6 charging programs switched by the “OPERATION MODE” button
Has a backlight display.
   Gel batteries with a capacity of up to 14 Ah, used in motorcycles and scooters, must be charged by selecting the program with the motorcycle icon on the display.
  Charging with a higher current may damage the battery.

Stock: > 1 pcs.

02088

Price: 29.00 €

Add to cart

View

Auto apkopes ratiņi

Mechanic creeper
Intended for professional usage in service stations and for self-repair.
Mechanic creeper is made of resistant to aggressive technical fluids and impact resistant plastic.
Equipped with three pairs of swivel rubber wheels.
Equipped with foam rubber cushion pad with leatherette cover.
For ease of movement is equipped with a handle.
Has two pans for the tools and spare parts placement.

Stock: 0 pcs.

43000

Price: 45.00 €

Add to cart

View

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 3000
Nominal load (kg) 2250
Pick up high (mm) 194
Plunger stroke (mm) 118
Screw pitch (mm) 60
Lift high (mm) 372
Package (pcs) 1
Weight: 3.75

Stock: 0 pcs.

43303

Price: 15.00 €

Add to cart

View

L-veida seškanšu atslēgu kompl.

L-type ball end hex wrench set
Set is equipped with ball hex keys placed on a plastic holder.
Individual packaging - a blister.
Number of items - 8
Kitting - 3,0, 4,0, 5,0, 6,0, 7,0, 8,0, 10,0, 12,0 мм

Stock: 0 pcs.

39158

Price: 7.30 €

Add to cart

View

Sprūdatslēga ar kvadrātu

>Mechanism with 72 teeth allows to rotate by 5 degree minimum angle
>Equipped with a flag switch, a quick-reset button and a holding ball
>Made by cold stamping method
>Material - chrome-vanadium steel CrV50BV30
>It is hardened to hardness not less than 39HRC
>It is chrome plated and matt finish to resist corrosion

Stock: 0 pcs.

39484

Price: 8.00 €

Add to cart

View

Mērlenta 5m

Measuring tape leght 5 m.
The shockproof rubberized case.

Stock: > 1 pcs.

11309

Price: 3.00 €

Add to cart

View

Vītņu griešanas komplekts

Set of thread-cutting 29pcs. TEHMASH M5-M12 in met / f 11683
A set of thread-cutting tools designed for cutting internal and external threads.
Tool material - steel 9 XC
  Packed in a metal case.
Complete set: M5 * 0 taps. 8, M5 * 0. 9 M6 * 0. 75, NPT 1 / 8-27, M6 * 1. 0, M8 * 1. 0, M8 * 1. 25, M10 * 1. 25, M10 * 1, 5, M12 * 1. 5, M12 * 1. 75
Dies M5 * 0. 8, M5 * 0. 9 M6 * 0. 75, NPT 1 / 8-27, M6 * 1. 0, M8 * 1. 0, M8 * 1. 25, M10 * 1. 25, M10 * 1, 5, M12 * 1. 5, M12 * 1. 75
Drill bit diameter 4. 2, 5. 0, 6. 8, 8. 5, 10. 3 mm
The holder for dies diameter is 25 mm
The holder for taps M3-M12

Stock: 0 pcs.

11683

Price: 29.00 €

Add to cart

View

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 5000
Nominal load (kg) 3750
Pick up high (mm) 185
Plunger stroke (mm) 110
Screw pitch (mm) 60
Lift high (mm) 355
Package (pcs) 1
Weight: 4.12

Stock: 0 pcs.

43050

Price: 20.00 €

Add to cart

View

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 3000
Nominal load (kg) 2250
Pick up high (mm) 180
Plunger stroke (mm) 110
Screw pitch (mm) 60
Lift high (mm) 350
Package (pcs) 1
Weight: 3.75

Stock: 0 pcs.

43030

Price: 15.00 €

Add to cart

View

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 10000
Nominal load (kg) 7500
Pick up high (mm) 195
Plunger stroke (mm) 120
Screw pitch (mm) 60
Lift high (mm) 375
Package (pcs) 1
Weight: 5.85

Stock: 0 pcs.

43100

Price: 24.00 €

Add to cart

View

Remonta sēdeklis

Has a rigid metal structure.
Tray with the cells at the seat bottom allows to place the necessary for work tools.
Has four swivel wheels for ease of use.
Pneumatic lift allows to adjust the seat height within 120 mm.
Seat diameter - 370 mm.
Foam rubber seat covered with leather imitation cloth.

Stock: 0 pcs.

43041

Price: 49.00 €

Add to cart

View

Eļļas filtra uzgriežņu atslēga

Oil filter wrench jaw type
Used for dismantling oil filters of internal combustion engines.
Wrench has a gear self-clamping design with three angled prongs.
Knurling on the prongs allows reliably fix the filter.
Wrench material – chrome-vanadium tool steel.
Has a standard 3/8 ' square drive for tap wrench.
Equipped with an universal adapter with internal square drive 1/2' for the tap wrench and external hex socket 21 mm for the wrench.
Delivered in individual cardboard box.
Size (mm) 65-110

Stock: 0 pcs.

40517

Price: 4.20 €

Add to cart

View

Eļļas filtra uzgriežņu atslēga

Oil filter wrench jaw type
Used for dismantling oil filters of internal combustion engines.
Wrench has a gear self-clamping design with three angled prongs.
Knurling on the prongs allows reliably fix the filter.
Wrench material – chrome-vanadium tool steel.
Has a standard 3/8 ' square drive for tap wrench.
Equipped with an universal adapter with internal square drive 1/2' for the tap wrench and external hex socket 21 mm for the wrench.
Delivered in individual cardboard box.
Size (mm) 35-75

Stock: 0 pcs.

40518

Price: 4.60 €

Add to cart

View

Starta vadi

starting cable
cable power: 900 A
cable length: 6 meters
number of cables: 2 pcs. (Cable + and Cable -)

Stock: 0 pcs.

8006

Price: 24.00 €

Add to cart

View

Muciņu komplekts

Drive socket set 12 items 1/4'DR (holder, sockets)

Stock: 0 pcs.

39844

Price: 12.00 €

Add to cart

View

Muciņu komplekts

Drive socket set 12 items 1/2'DR (holder, sockets)

Stock: 0 pcs.

39842

Price: 21.00 €

Add to cart

View

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: > 1 pcs.

30231

Price: 5.00 €

Add to cart

View