Instruments

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: > 1 pcs.

Led pārnēsājamā lampa

Rechargeable COB-LED Worklights
3W COB+1W LED, 280Lm

Stock: 0 pcs.

Pumpšļūteņu uzgaļu komplekts

A set of tip for pumping hose

Stock: 0 pcs.

Mērlente

Measuring tape leght 7.5 m.
The shockproof rubberized case.
Three options for fixing the measuring tape.
Magnetic tip tape.
Measuring board width 2.5 cm

Stock: 0 pcs.

Akumulātora lādēšanas ierīce

Charger with microprocessor 4A IP65 TUV / GS.
Ideal for lead-acid, gel and AGM batteries.
Use - cars, ATVs, boats, mowers, scooters, motorcycles, snowmobiles and jet skis.
Microprocessor control, nine-step intelligent charging characteristics.
Stable charging function.
Diagnose and charge heavily discharged batteries.
Insulated terminals.
Battery capacity 1.2 Ah - 120 Ah
Input parameters: 220-240 VAC 50 Hz
Output parameters: 6V 2A / 12 V 2 / 4A
Battery Capacity: 1.2 Ah - 120 Ah

Stock: > 1 pcs.

LED spuldžu testeris

LED bulb tester 12 V
-60w

Stock: > 1 pcs.

Plastmasas savilcēji

Plastic ties.
-4.8 x 380 mm

Stock: > 1 pcs.

Domkrats hidrauliskis (130-345MM)

Hydraulic jack (130-345MM)
-2 tons

Stock: > 1 pcs.

Oil filter wrench jaw type

Stock: > 1 pcs.

Rokas pumpis

Hand pump

Stock: 0 pcs.

Pārnēsājamā lampa

Portable lamp

Stock: 0 pcs.

Riteņa atslēga

Wheel nut wrench 19мм

Stock: > 1 pcs.

Wrench type

Stock: > 1 pcs.

Wrecking bar

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.